Full of thoughtful details the 2-story Real Good Toys Victorian Cottage Jr. Kit – 1-Inch Scale is like a gingerbread house come to life. Precise workmanship lends this quaint design fairytale appeal from the intricate laser-cut stenciling to exquisite decorative trim. This elegant traditional cottage features five rooms with 9-inch floor-to-ceiling height as well as expertly molded railings and porch posts raised panel shutters and door flower boxes a detailed staircase moveable room dividers and wooden shingles for the roof. The gingerbread trim is surprisingly durable at 0.125 inches thick and the 0.375-inch milled clapboard exterior walls and grooved sidewalls ensure easy one-step assembly and a guaranteed fit. The window kits even include interior trim. Crafted from durable MDF this unfurnished cottage boasts a convenient open-back design. This kit is suitable for use by collectors. As it includes small pieces it’s not recommended for children under the age of 3. Recommended supplies include a hammer fine-toothed saw glue utility knife masking tape sandpaper paint brushes ruler and brads. It should take approximately eight hours to assemble and finish.About Real Good ToysBased in Barre Vt. Real Good Toys has been handcrafting miniature homes since 1973. By designing and engineering the world’s best and easiest to assemble miniature homes Real Good Toys makes dreams come true. Their commitment to exceptional detail the highest level of quality and ease of assembly make them one of the most recommended names in dollhouses. Real Good dollhouses make priceless gifts to pass on to your children and your children’s children for years to come.
Filed under Dollhouses-Unassembled Kits by on May 11th, 2012. Comment. 
Features: -12 Rooms. -Complete Kit includes everything you need to finish as shown (paint, glue, curtains and any landscaping or furnishings are not included). -Precision Workmanship – engineered parts pre-cut to really work. -Sturdy Construction features 3/8″ thick milled clapboard exterior walls and grooved sidewalls for easy, one-step assembly, guaranteed fit and durability . -Pre-assembled windows and doors . -Movable room dividers accept standard doors . -Expertly molded railings and porch posts . -Hand-split, octagonal pine wooden shingles . -Step-by-step instructions with detailed drawings. -Bold and fancy, laser-cut gingerbread trims. -Fancy, turned porch and newel posts. -Full foundation includes decorative lattice. -Interior window and door trim included. -Unique assembled oval windows. -Made in Vermont, USA Specifications: -Overall Dimensions: 39.625″ H x 58.5″ W x 27.5″ D. -1″ = 1′ Scale. -10″ Floor to ceiling height . -3/8″ thick upper floors . Recommended Options: -Reddish-brown shingle dye or gray shingle dye. -Electrical piercing tool, makes nailing, screwing and setting electrical parts easier. -Sheet Copper, one square foot roll , easy finish for roof eaves, valleys and other hard to finish details. -12″ Steel turntable holds up to 1000 lbs. -9 Traditional wallpaper patterns, 2 sheets of each pattern. -Additions and components also available . Recommended Supplies (not included): -Hammer. -Fine toothed saw. -Glues. -Utility knife. -Masking tape. -Sandpaper: 100 and 320 grit. -Paints. -Paint brushes. -Ruler. -.75″ or 1″ Brads. -Elastic bands How it’s made Video
Filed under Dollhouses by on Apr 18th, 2012. Comment.
Features: -8 Rooms. -Choice of Milled MDF or Milled Plywood for exterior wall finishes: – Milled MDF has 3/8″ Clapboard profile milled into the surface of the exterior walls. This is the quickest and easiest was to own a house with clapboard siding, because it is built-in and ready to paint. . -Milled Plywood is the same as Milled MDF except the material of the exterior walls and the interior walls are made of plywood -Precision Workmanship – engineered parts pre-cut to really work. -Sturdy Construction features 3/8″ thick milled clapboard exterior walls and grooved sidewalls for easy, one-step assembly, guaranteed fit and durability . -Unique Side-Opening Access . -Movable room dividers accept standard doors . -Raised panel shutters & door . -Expertly molded railings and porch posts . -Flower boxes and a detailed staircase . -Wooden shingles for the roof . -Step-by-step instructions with detailed drawings. -Made in Vermont, USA. -Not recommended for children under the age of 3. Specifications: -Overall dimensions: 33″ H x 34.5″ W x 25″ D -1″ = 1′ scale. -3/8″ thick upper floors . -9″ Floor to ceiling height . Recommended Options: -Reddish-brown shingle dye or gray shingle dye. -Electrical piercing tool, makes nailing, screwing and setting electrical parts easier. -Sheet Copper, one square foot roll , easy finish for roof eaves, valleys and other hard to finish details. -12″ Steel turntable holds up to 1000 lbs. -9 Traditional wallpaper patterns, 2 sheets of each pattern. -Additions and components also available . Recommended Supplies (not included): -Hammer. -Fine toothed saw. -Glues. -Utility knife. -Masking tape. -Sandpaper: 100 and 320 grit. -Paints. -Paint brushes. -Ruler. -.75″ or 1″ Brads. -Elastic bands How it’s made Video
Filed under Dollhouses by on Mar 28th, 2012. Comment.
Features: -7 Rooms. -Choice of Milled MDF, Milled Plywood or Brick for exterior wall finishes: – Milled MDF has 3/8″ Clapboard profile milled into the surface of the exterior walls. This is the quickest and easiest was to own a house with clapboard siding, because it is built-in and ready to paint. -Milled Plywood is the same as Milled MDF except the material of the exterior walls and the interior walls are made of plywood. -Brick exterior walls are pre-finished, they have painted wooden brick attached to them. -Complete Kit includes everything you need to finish as shown (Paint, glue, curtains and any landscaping or furnishings are not included) -Precision Workmanship – engineered parts pre-cut to really work. -Movable room dividers accept standard doors . -Expertly molded railings and porch posts . -Wooden shingles for the roof . -Step-by-step instructions with detailed drawings . -A unique assembly process features grooved connectors for ease of assembly, guaranteed fit and durability . -Detailed staircase with banisters . -Raised panel door . -Roof cresting adds an interesting flair to the roof top . -Shaped, solid wood moldings add unique style to the extended floor edges . -The mansard roof maximizes the living and decorating space on the second floor. -Made in Vermont, USA. -Not recommended for children under the age of 3. Specifications: -Overall Dimensions: 21″ H x 32″ W x 16″ D . -Scale: 1″ = 1′. -10″ Floor to ceiling height . -3/8″ Thick milled or brick walls . -1/8″ Thick durable gingerbread trim . Recommended Options: -Reddish-brown shingle dye or gray shingle dye. -Electrical piercing tool, makes nailing, screwing and setting electrical parts easier. -Sheet Copper, one square foot roll , easy finish for roof eaves, valleys and other hard to finish details. -12″ Steel turntable holds up to 1000 lbs. -9 Traditional wallpaper patterns, 2 sheets of each pattern. -Additions and components also available . Recommended Supplies (not included): -Hammer. -Fine toothed saw. -Glues. -Utility knife. -Masking tape. -Sandpaper: 100 and 320 grit. -Paints. -Paint brushes. -Ruler. -.75″ or 1″ Brads. -Elastic bands How it’s made Video
Filed under Dollhouses by on Jan 27th, 2012. Comment.
Features: -10 Rooms. -Complete Kit includes everything you need to finish as shown (paint, glue, curtains and any landscaping or furnishings are not included). -Precision Workmanship – engineered parts pre-cut to really work. -Sturdy Construction features 3/8″ thick milled clapboard exterior walls and grooved sidewalls for easy, one-step assembly, guaranteed fit and durability . -Front-Opening Design . -Fancy porch posts and spindles . -Pre-assembled windows and doors . -Movable room dividers accept standard doors . -Hand-split, octagonal pine wooden shingles . -Step-by-step instructions with detailed drawings . -Additions and/or porches also available separately . -Custom hinges and shutters included . -Detailed staircase with banisters and landing rails . -Milled all four sides . -Made in Vermont, USA. -Not recommended for children under the age of 3. Specifications: -Overall Dimensions: 32.5″ H x 33″ W x 23″ D. -1″ = 1′ Scale. -10″ Floor to ceiling height . -3/8″ thick upper floors . Recommended Options: -Reddish-brown shingle dye or gray shingle dye. -Electrical piercing tool, makes nailing, screwing and setting electrical parts easier. -Sheet Copper, one square foot roll , easy finish for roof eaves, valleys and other hard to finish details. -12″ Steel turntable holds up to 1000 lbs. -9 Traditional wallpaper patterns, 2 sheets of each pattern. -Additions and components also available . Recommended Supplies (not included): -Hammer. -Fine toothed saw. -Glues. -Utility knife. -Masking tape. -Sandpaper: 100 and 320 grit. -Paints. -Paint brushes. -Ruler. -.75″ or 1″ Brads. -Elastic bands Click below to watch video of how Real Good Toy Doll Houses are made:
Filed under Dollhouses by on Jan 27th, 2012. Comment.
